Search Criteria
NSN/NIIN No.:
Part No. :
(13-16 digit NSN/9 digit NIIN)
5305-00-054-92505305-00-054-9248
NSNDescriptionAssign Date
5305-00-054-9249SCREW,MACHINE01/01/1960
NSNDescriptionDetailOpen Solicitations
5305-00-054-9249SCREW,MACHINE0
Part NumberDescriptionCompanyQuantity
MS24694C110MACHINE SCREW57
MS24694C110SCREW GALI CORPORATION920
MS24694C110SCREW FLIGHT SOURCE INC10
MS24694-C110SCREW DAVINCI AIRCRAFT, INC.500
MS24694C110MACHINE SCREW AIRCRAFT RESOURCES, CORP.175
SCREW KWAT ENTERPRISES CORP.1
MS24694-C110SCREW A.L.A. SPA64
For additional information Register for Free Trial
CompanyAward DateQuantityPriceContractDelivery Date
Free Trial02/06/2018Free TrialFree TrialSPE5E218V4022 03/23/2018
Free Trial02/03/2017Free TrialFree TrialSPE5E217V4163 07/24/2017
Free Trial12/02/2016Free TrialFree TrialSPE5E217V2178 12/22/2016
Free Trial02/25/2015Free TrialFree TrialSPE5E215V3879 03/17/2015
Free Trial12/02/2012Free TrialFree TrialSPM5E213MQ250 12/23/2012
Free Trial02/21/2012Free TrialFree TrialSPM5A212MQ660 05/21/2012
Free Trial05/21/1994Free TrialFree TrialSP050094MJL17
Free Trial05/01/1994Free TrialFree TrialSP050094MJL17
Free Trial03/28/1994Free TrialFree TrialSP050094MCP34
Free Trial03/01/1994Free TrialFree TrialSP050094MCP34
For additional information Register for Free Trial
Part NumberCompanyCAGE
MS24694C110NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE I80205
MS24694C110MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTM96906
For additional information Register for Free Trial
NameValue
FASTENER LENGTH1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
HEAD DIAMETER0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER0.250 INCHES
MINIMUM TENSILE STRENGTH85000 POUNDS PER SQUARE INCH
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 304
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
For additional information Register for Free Trial
CodeDefinition
ACQUISITION METHOD CODE.
'All Departments1SUITABLE FOR COMPETITIVE ACQUISITION.
ACQUISITION METHOD SUFFIX CODE.
'All DepartmentsGTHE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2.
MAJOR ORGANIZATIONAL ENTITY.
ArmyDAArmy
Air ForceDFAir Force
NavyDNNavy
Defense Logistics Agency.DSDefense Logistics Agency.
PRICE
All DepartmentsPrice6.89
PRECIOUS METALS INDICATOR CODES.
All DepartmentsUPrecious Metal type is unknown.
CRITICALITY CODE.
All DepartmentsXThe item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
AUTOMATIC DATA PROCESSING EQUIPMENT.
All Departments
ELECTROSTATIC DISCHARGE CODE.
All Departments
HAZARDOUS MATERIALS INDICATOR CODE.
All DepartmentsNIndicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
DEMILITARIZATION CODE.
All DepartmentsANo-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9).
For additional information Register for Free Trial
SCREW, MACHINE CRES PASS MIL-STD-130N, 17 DEC 2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE SECTION L, CLAUSE 52.211-2 FOR ORDERING SUCH DATA. ************************************************ QUALIFIED SUPPLIERS LIST FOR MANUFACTURERS/ QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLM/QSLD) REQUIREMENT (DLA TROOP SUPPORT MARCH 1995) FOR FSC'S 5305, 5306, 5307 AND 5310 (NUTS). ONLY MANUFACTURERS/DISTRIBUTORS LISTED ON THE QSLM/QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO THIS SOLICITATION (CLASS 3 FASTENERS). SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLM/QSLD REQUIREMENT MUST INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION. ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S) AS CITED IN THE PURCHASE ORDER TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED BY THE QUOTER/OFFEROR. ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT. FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED QSLM/QSLD SUPPLIER WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, REFERENCES TO SOURCE INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ H1331, AND DLAD 52.246-9064, IF REFERENCED, DO NOT APPLY. FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE: http://www.troopsupport.dla.mil/ce/qsl/ -OR- WRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT - NASA, BLDG 6/D, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092 ************************************************ *** GAUGING REQUIREMENTS AS FOLLOWS *** ALL CLASS 3A AND 3B THREADS WILL BE INSPECTED FOR DIMENSIONAL CONFORMANCE IN ACCORDANCE WITH SYSTEM 22 OF FED-STD-H28/20. THIS EXCLUDES SELF-LOCKING NUTS, INTERNAL THREADS SMALLER THAN .190 INCH DIA AND EXTERNAL THREADS SMALLER THAN .138 INCH DIA. DLAD clause 52.246-9000 Certificate of Quality Compliance (COQC) is hereby incorporated into this award. ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs). Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes precedence over non-government standard ASQ Z1.4. Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor". AWARDS OF THIS NSN MUST BE SOURCE INSPECTED UNLESS AWARDED TO A QSLM/QSLD SUPPLIER THAT IS LISTED ON THE APPLICABLE QSL LIST AND SUPPLYING MATERIAL THAT IS IN COMPLIANCE WITH THE QSL PROGRAM.
Cage# 80205 and PartNumber# MS24694C110
Doc. NumberDoc. TypeDoc. Def.Doc. CodeDoc. DateAmdt. DateCage
NASM24694OTHBASIC10/23/201210/23/2012
NASM7839OTHBASIC08/31/201108/31/2011
NASM24694OTHBASIC03/23/200903/23/2009

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us