|
|
|
National Stock Number:
1650-00-052-6592
Federal Supply Class:
1650
National Item Identification Number:
000526592
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 049388 | 90005 | PUROLATOR FACET INC. | | 049478 | 06840 | BENDIX CORP THE | | 049478 | 90005 | PUROLATOR FACET INC. | | 21-11402 | 05228 | PTI TECHNOLOGIES INC. | | 21-11402 | 81873 | WOODWARD HRT INC | | 21-11402 | 96124 | TRANSDIGM INC | | 21-16713-8C | 05228 | PTI TECHNOLOGIES INC. | | 21424-400 FIND 42 | 78062 | SARGENT AEROSPACE & DEFENSE, LLC | | 9056-4000 | 94592 | FLUID CONDITIONING PRODUCTS, INC. | | AC-3255E-8Y1 | 18350 | PALL AEROPOWER CORPORATION | | AC3255E8 | 18350 | PALL AEROPOWER CORPORATION | | AC3255E8 | C0202 | PALL GMBH | | M8815/3-8C | 78062 | SARGENT AEROSPACE & DEFENSE, LLC | | M8815/3-8C | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-F-8815 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS28897-8C | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DROP PRESSURE | 15.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.137 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.670 INCHES NOMINAL | | BODY OVERALL LENGTH | 4.250 INCHES MINIMUM AND 4.260 INCHES MAXIMUM | | DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | 70.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 15.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | HYDRAULIC FILTER,ACFT | | MATERIAL | STEEL CORROSION RESISTING CONTAINER/CARTRIDGE | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | 3 PRONGS AT 120 DEG SPACING IN FLANGE OF ONE END | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM |
|
|