|
|
|
National Stock Number:
1650-00-061-7835
Federal Supply Class:
1650
National Item Identification Number:
000617835
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 322890 | 13520 | DONALDSON COMPANY, INC. | | AC3255E6 | 18350 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| DROP PRESSURE | 15.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.250 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.670 INCHES NOMINAL | | BODY OVERALL LENGTH | 3.785 INCHES NOMINAL | | DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | 70.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 15.0 ABSOLUTE | | FLOW DIRECTION | INSIDE OUT | | FSC APPLICATION DATA | HYDRAULIC SYSTEM,ACFT | | MATERIAL | STEEL CORROSION RESISTING CONTAINER/CARTRIDGE | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | 3 PRONGS AT 120 DEG SPACING IN FLANGE OF ONE END | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM |
|
|