| DESIGN CHARACTERISTICS | SINGLE ACTING TWIN CYLINDER |
| EXTENDED LENGTH | 39.750 INCHES NOMINAL |
| COMPRESSED LENGTH | 27.250 INCHES NOMINAL |
| BORE DIAMETER | 1.6865 INCHES MINIMUM |
| 1.6877 INCHES MAXIMUM |
| FIRST PISTON ROD END STYLE | BEARING TYPE |
| BODY MATERIAL | STEEL, MIL-S-5000, COMP 4340, COND A |
| INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| OVERALL WIDTH | 13.285 INCHES NOMINAL |
| OVERALL HEIGHT | 4.780 INCHES NOMINAL |
| MOUNTING TYPE AND LOCATION | FLANGE CENTER SECTION |
| MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 7.5005 INCHES MINIMUM |
| 7.5015 INCHES MAXIMUM |
| MOUNTING FACILITY DIAMETER | 0.4995 INCHES MINIMUM |
| 0.5000 INCHES MAXIMUM |
| PORT LOCATION AND QUANTITY | 2 CENTER SECTION |
| 2 CYLINDER HEAD END |
| PORT STYLE | GASKET SEAL |
| PORT THREAD SERIES DESIGNATOR | UNJF |
| PORT THREAD DIAMETER | 0.4375 INCHES NOMINAL SINGLE PORT |
| 0.5625 INCHES NOMINAL ALL PORTS |
| 0.7500 INCHES NOMINAL 1ST PORT |
| PORT THREAD QUANTITY PER INCH | 20 SINGLE PORT |
| 18 ALL PORTS |
| 16 1ST PORT |
| PORT THREAD CLASS | 3B |
| SEAT ANGLE IN DEG | 120.0 |
| INSIDE DIAMETER | 0.172 INCHES NOMINAL SINGLE PORT |
| 0.297 INCHES NOMINAL ALL PORTS |
| 0.391 INCHES NOMINAL 1ST PORT |
| OUTSIDE DIAMETER | 0.454 INCHES MINIMUM SINGLE PORT |
| 0.459 INCHES MAXIMUM ALL PORTS |
| 0.580 INCHES MINIMUM 1ST PORT |
| 0.585 INCHES MAXIMUM 2ND PORT |
| 0.769 INCHES MINIMUM 3RD PORT |
| 0.774 INCHES MAXIMUM 4TH PORT |
| PRESSURE RATING | 200.0 POUNDS PER SQUARE INCH MAXIMUM |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 77272 |
| DESIGN CONTROL REFERENCE | 114H4000-47 |