|
|
|
National Stock Number:
1680-00-094-3233
Federal Supply Class:
1680
National Item Identification Number:
000943233
Description:
SHAFT ASSEMBLY,FLEXIBLE
Detail:
An item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
|
Manufacturer Information:
| 31556-026-00 | 31435 | LUCAS AEROSPACE POWER EQUIPMENT CORPORATION | | 31556-026-00 | 35351 | GE AVIATION SYSTEMS LLC | | 31556-026-00 | 3CPE0 | SAFRAN POWER USA LLC | | 635090-6 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| CASING MATERIAL | STEEL | | CASING LENGTH BETWEEN FERRULES | 26.000 INCHES NOMINAL | | CASING OUTSIDE DIAMETER | 0.445 INCHES NOMINAL | | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS | | THREAD LOCATION | INTERNAL BOTH ENDS | | SCREW THREAD SERIES DESIGNATOR | UNS BOTH ENDS | | THREAD DIRECTION | RIGHT-HAND BOTH ENDS | | THREAD CLASS | 2B BOTH ENDS | | THREAD DEPTH | 0.219 INCHES NOMINAL BOTH ENDS | | SWIVEL END | NOT PROVIDED BOTH ENDS | | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS | | WIDTH ACROSS FLATS | 0.750 INCHES NOMINAL BOTH ENDS | | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS | | CORE MATERIAL | STEEL | | CORE OVERALL LENGTH | 20.938 INCHES NOMINAL | | CORE DIAMETER | 0.250 INCHES NOMINAL | | CORE ROTATION DIRECTION | CLOCKWISE | | END TYPE | ROUND, INTERNAL SPLINED BOTH ENDS | | TIP LENGTH | 0.232 INCHES MINIMUM AND | | 0.255 INCHES MAXIMUM BOTH ENDS | | CROSS SECTION SIZE AND LOCATION | 0.406 INCHES NOMINAL DIAMETER BOTH ENDS | | SETSCREW | NOT INCLUDED BOTH ENDS | | SPLINE TYPE | INVOLUTE BOTH ENDS | | SPLINE QUANTITY | 12 BOTH ENDS | | SPLINE MAJOR DIAMETER | 0.304 INCHES MINIMUM AND | | 0.310 INCHES MAXIMUM BOTH ENDS | | SPLINE MINOR DIAMETER | 0.240 INCHES MINIMUM AND | | 0.242 INCHES MAXIMUM BOTH ENDS | | SPLINE LENGTH | 0.232 INCHES MINIMUM AND | | 0.255 INCHES MAXIMUM BOTH ENDS | | PITCH DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS | | SPLINE PRESSURE ANGLE IN DEG | 14.5 BOTH ENDS | | CORE REMOVABILITY | REMOVABLE | | OVERALL LENGTH | 20.938 INCHES NOMINAL | | FSC APPLICATION DATA | FLAP,COWL INSTL. ACFT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 31435 | | DESIGN CONTROL REFERENCE | 31556-026-00 |
|
|