|
|
|
National Stock Number:
1680-00-124-1805
Federal Supply Class:
1680
National Item Identification Number:
001241805
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 206-031-581-2 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BORE DIAMETER | 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM | | BORE LENGTH | 0.090 INCHES NOMINAL | | BORE TYPE | PLAIN STRAIGHT | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.625 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM | | LINK END THICKNESS | 0.090 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729, COND N MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-6758, COND D4 MIL SPEC 2ND MATERIAL RESPONSE | | III MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL WIDTH | 0.740 INCHES NOMINAL | | SHAFT END THICKNESS | 0.090 INCHES NOMINAL | | SPECIAL FEATURES | 3.280 IN. LG SHAFT WELDED TO LEVER AT BORE END; 10-32 NF-3A THD ON ONE END; 0.097 IN. DIA HOLE ON OPPOSITE END | | STYLE DESIGNATOR | FLAT, ONE HOLE LINK END |
|
|