| AFTER END DESIGN | TAPERED |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 7.500 INCHES NOMINAL |
| AFTER BEARING SLEEVE LENGTH | 30.000 FEET NOMINAL |
| CONSTRUCTION | HOLLOW |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES COVERED |
| DEPTH | 0.505 INCHES NOMINAL |
| FORWARD END DESIGN | TAPERED |
| FORWARD END TAPER LENGTH | 0.448 FEET NOMINAL |
| FORWARD END TAPER MAJOR DIAMETER | 7.250 INCHES NOMINAL |
| FORWARD END TAPER | 0.125 PER FOOT IN INCHES NOMINAL |
| FORWARD BEARING SLEEVE LENGTH | 36.000 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 7.500 INCHES NOMINAL |
| INSIDE DIAMETER | 1.750 INCHES MINIMUM AND 4.500 INCHES MAXIMUM |
| INTERMEDIATE BEARING SLEEVE LENGTH | 1.792 FEET NOMINAL |
| INTERMEDIATE BEARING SLEEVE OUTSIDE DIAMETER | 7.500 INCHES NOMINAL |
| KEYWAY QUANTITY | 2 AND 3 |
| KEYWAY WIDTH | 1.375 INCHES MINIMUM AND 1.437 INCHES MAXIMUM |
| KEYWAY DEPTH | 0.505 INCHES NOMINAL |
| MAJOR DIAMETER | 4.500 INCHES NOMINAL |
| OUTSIDE DIAMETER | 6.500 INCHES NOMINAL |
| OVERALL LENGTH | 31.167 FEET NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890 CL AN,FORGED MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | RUBBER |
| QUANTITY | 2 |
| WIDTH | 1.375 INCHES MINIMUM AND 1.437 INCHES MAXIMUM |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER MAJOR DIAMETER | 6.500 INCHES NOMINAL |
| TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| TAPER LENGTH | 1.333 FEET NOMINAL |
| THREAD LENGTH | 3.875 INCHES |
| THREAD QUANTITY | 4 PER INCH |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| USAGE LOCATION | CENTER |