| FIRST END BEARING SEAT | NOT INCLUDED |
| FIRST END TYPE | FLANGED |
| FLANGE HOLE TAPER | 8.500 INCHES NOMINAL PER FOOT |
| FLANGE OVERALL THICKNESS | 0.500 INCHES NOMINAL |
| FLANGE THICKNESS AT MOUNTING HOLE | 0.406 INCHES NOMINAL |
| FLANGE OUTSIDE DIAMETER | 6.123 INCHES MINIMUM AND 6.127 INCHES MAXIMUM |
| OVERALL LENGTH | 41.281 INCHES MINIMUM AND 41.406 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4150H ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 4150H |
| METALLIC HARDNESS RATING | 38.0 MINIMUM ROCKWELL C AND 48.0 MAXIMUM ROCKWELL C |
| MOUNTING FACILITY TYPE AND QUANTITY | 12 TAPERED HOLE |
| SECOND END BEARING SEAT | NOT INCLUDED |
| SECOND END SPLINE MINOR DIAMETER | 1.830 INCHES MINIMUM AND 1.840 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 16 |
| SECOND END SPLINE TYPE | STRAIGHT |
| SECOND END TYPE | SPLINED |
| SECOND END SPLINE LENGTH | 3.719 INCHES MINIMUM AND 3.781 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 1.975 INCHES MINIMUM AND 1.980 INCHES MAXIMUM |
| TAPER MAJOR DIAMETER | 0.783 INCHES NOMINAL |