| FIRST END DISTANCE FROM BEARING SEAT TO END | 1.770 INCHES NOMINAL |
| FIRST END BEARING SEAT DIAMETER | 1.618 INCHES NOMINAL |
| FIRST END BEARING SEAT WIDTH | 1.850 INCHES NOMINAL |
| FIRST END BEARING SEAT | INCLUDED |
| FIRST END TYPE | FLANGED |
| FLANGE OVERALL THICKNESS | 0.390 INCHES NOMINAL |
| FLANGE THICKNESS AT MOUNTING HOLE | 0.390 INCHES NOMINAL |
| FLANGE OUTSIDE DIAMETER | 6.560 INCHES NOMINAL |
| HOLE DIAMETER | 0.514 INCHES NOMINAL |
| OVERALL LENGTH | 33.810 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1050 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1050 |
| METALLIC HARDNESS RATING | 60.0 NOMINAL ROCKWELL C |
| MOUNTING FACILITY TYPE AND QUANTITY | 5 UNTHREADED HOLE |
| SECOND END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| SECOND END FACILITY DIAMETER | 0.745 INCHES MINIMUM AND 0.754 INCHES MAXIMUM |
| SECOND END FACILITY LOCATION | 0.308 IN. MIN 0.312 IN. MAX FROM SHAFT END |
| SECOND END FACILITY WIDTH | 0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM |
| SECOND END BEARING SEAT | NOT INCLUDED |
| SECOND END SPLINE LENGTH | 1.715 INCHES NOMINAL |
| SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| SECOND END SPLINE QUANTITY | 30 |
| SECOND END SPLINE TYPE | INVOLUTE |
| SECOND END PITCH DIAMETER | 1.250 INCHES NOMINAL |
| SECOND END TYPE | SPLINED |