|
|
|
National Stock Number:
2520-00-135-2309
Federal Supply Class:
2520
National Item Identification Number:
001352309
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 2448315 | 23862 | MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02 | | 2457690AND3745182 | 23862 | MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02 | | 2457690AND3745182 | 7X677 | GENERAL MOTORS LLC | | 59502 | 81142 | EATON CORP AXLE DIV |
|
Techincal Specification:
| FIRST END BEARING SEAT | NOT INCLUDED | | SECOND END TYPE | SPLINED | | SECOND END BEARING SEAT | NOT INCLUDED | | MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 1041H ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 39.531 INCHES MINIMUM AND | | 39.656 INCHES MAXIMUM | | FIRST END TYPE | FLANGED | | FLANGE OVERALL THICKNESS | 1.031 INCHES MINIMUM AND | | 1.094 INCHES MAXIMUM | | FLANGE THICKNESS AT MOUNTING HOLE | 0.500 INCHES NOMINAL | | FLANGE OUTSIDE DIAMETER | 6.185 INCHES MINIMUM AND | | 6.189 INCHES MAXIMUM | | MOUNTING FACILITY TYPE AND QUANTITY | 8 TAPERED HOLE | | TAPER MAJOR DIAMETER | 0.562 INCHES NOMINAL | | FLANGE HOLE TAPER | 6.000 INCHES NOMINAL PER FOOT | | SECOND END SPLINE TYPE | STRAIGHT | | SECOND END SPLINE QUANTITY | 16 | | SECOND END SPLINE LENGTH | 3.375 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.870 INCHES MINIMUM AND | | 1.875 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 1.690 INCHES MINIMUM AND | | 1.700 INCHES MAXIMUM |
|