|
|
|
National Stock Number:
2815-00-132-8759
Federal Supply Class:
2815
National Item Identification Number:
001328759
Description:
ENGINE,DIESEL
Detail:
A RECIPROCATING INTERNAL COMBUSTION ENGINE IN WHICH THE POWER NECESSARY TO PRODUCE MOTION OF THE MECHANISM IS OBTAINED BY IGNITING A COMPRESSED FUEL AND AIR MIXTURE WITHIN THE CYLINDER OR CYLINDERS BY EXTREME HEAT RESULTING FROM COMPRESSION. THE ENGINE CONSISTS OF A CYLINDER BLOCK ASSEMBLY COMPLETE WITH CYLINDER HEAD(S) AND OIL PAN(S). IT MAY INCLUDE ATTACHMENTS OR ACCESSORIES, SUCH AS STARTER MOTOR, TRANSMISSION FOR AUXILIARY EQUIPMENT, CLUTCH, OIL FILTER, FLYWHEEL, FLYWHEEL HOUSING OR BATTERY CHARGING GENERATOR. A FUEL TANK IS NOT INCLUDED. FOR A COMPLETE OPERATING POWER UNIT MOUNTED ON A BASE, SEE POWER UNIT (1), DIESEL.
|
Manufacturer Information:
| 8-268ANM | 24617 | GENERAL MOTORS CORP | | 8-268ANM | 55380 | HATCH & KIRK, INC. | | MILE16677 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ACCESSORY COMPONENTS AND QUANTITY | AIR CLEANER 1; BASE,MTG 1; FILTER,FUEL OIL 1; GOVERNOR,OVERSPEED 1; GOVERNOR,SPEED REGULATOR 1; INSTRUMENT PANEL,W/INSTRUMENTS 1; PAN,OIL 1; PUMP,FRESH WATER 1; PUMP,FUEL TRANSFER 1; PUMP,LUBRICATING OIL 1; PUMP,SEA WATER 1; TANK,EXPANSION,WATER 1 | | CRANKSHAFT ROTATION DIRECTION | COUNTERCLOCKWISE | | CYLINDER ARRANGEMENT | STRAIGHT IN-LINE | | CYLINDER QUANTITY | 8 | | ENGINE OVERALL HEIGHT | 94.000 INCHES NOMINAL | | ENGINE OVERALL LENGTH | 179.000 INCHES NOMINAL | | ENGINE OVERALL WIDTH | 53.250 INCHES NOMINAL | | MAIN POWER TAKEOFF ROTATION DIRECTION | COUNTERCLOCKWISE | | PISTON ACTION TYPE | SINGLE ACTING | | REDUCTION GEAR RATIO | 3.345 TO 1 | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY ACCESSORY COMPONENTS AND QUANTITY,REDUCTION GEAR,CLUTCH,AND MAIN POWER TAKE-OFF ROTATION DIRECTION | | SPECIAL FEATURES | NONMAGNETIC DESIGN; PNEUMATICALLY ACTUATED REVERSE GEAR; W/MANUAL AND REMOTE CONTROL | | STANDARD BORE DIAMETER | 6.500 INCHES | | STARTING METHOD | AIR | | STROKES PER CYCLE | 2 | | STROKE LENGTH | 7.000 INCHES |
|
|