| MOUNTING FACILITY QUANTITY | 1 AND 1 |
| MOUNTING FACILITY | SLOT AND THREADED HOLE |
| MOUNTING SLOT LENGTH | 1.137 INCHES NOMINAL |
| MOUNTING SLOT WIDTH | 0.403 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| MOUNTING STANDARD CONTROLLING AGENCY | SAE |
| MOUNTING STANDARD NUMBER | J546 |
| MOUNTING METHOD | FLANGE |
| ROTATION ELEMENT TYPE | PERMANENT MAGNET ROTOR |
| SECONDARY TERMINAL TYPE | PUSH-IN |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SPARK DISTRIBUTION METHOD | CONTACT |
| SURFACE TREATMENT | ENAMEL |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 4.182 INCHES MINIMUM AND 4.194 INCHES MAXIMUM |
| DISTRIBUTOR CAP | INCLUDED |
| DRIVE CONNECTION TYPE | IMPULSE COUPLED |
| CONTACT SET QUANTITY | 1 |
| FEATURES PROVIDED | RADIO INTERFERENCE SHIELDING |
| IGNITION TYPE FOR WHICH DESIGNED | SINGLE |
| IMPULSE QUANTITY PER REVOLUTION | 4 |
| PERFORMANCE TYPE | HIGH TENSION |
| POLE QUANTITY | 2 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY THREAD DIAMETER | 0.375 INCHES NOMINAL |
| MOUNTING FACILITY THREAD QUANTITY PER INCH | 16 |
| MOUNTING FACILITY THREAD SERIES | UNC |