| DISTANCE FROM END TO KEYWAY CENTER | 1.440 INCHES NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2000 |
| BOTTOM MOUNTING HOLE DIAMETER | 0.451 INCHES MINIMUM AND 0.463 INCHES MAXIMUM |
| COTTER PIN HOLE | NOT INCLUDED |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 6.110 INCHES MINIMUM AND 6.140 INCHES MAXIMUM |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 7.230 INCHES MINIMUM AND 7.260 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.969 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.970 INCHES NOMINAL |
| FURNISHED ITEMS | COOLING FAN AND LOCKWASHER AND NUT AND WOODRUFF KEY |
| GROUND POLARITY TYPE | NEGATIVE |
| GROUNDING METHOD | EXTERNAL OR INTERNAL |
| KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| KEYWAY LENGTH | 0.750 INCHES NOMINAL |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 2500 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| SECOND STEP DIAMETER | 0.874 INCHES NOMINAL |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| STORAGE TYPE | SHED |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD CLASS | 2A |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.780 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 18 |
| THREAD SERIES | UNF |
| UNTHREADED PORTION LENGTH | 1.320 INCHES NOMINAL |
| VOLTAGE IN VOLTS | 12.0 |