| INLET CONNECTION TYPE | UNTHREADED 1ST INLET |
| INLET CONNECTION TYPE | UNTHREADED 2ND INLET |
| INLET INSIDE DIAMETER | 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM 1ST INLET |
| INLET INSIDE DIAMETER | 4.000 INCHES NOMINAL 2ND INLET |
| INLET LOCATION | LOCATED 1.620 IN. OFF HORIZONTAL CENTERLINE,7.120 IN. FROM END SINGLE INLET |
| INLET OUTSIDE DIAMETER | 2.925 INCHES MINIMUM AND 2.955 INCHES MAXIMUM 1ST INLET |
| INLET OUTSIDE DIAMETER | 5.220 INCHES MINIMUM AND 5.250 INCHES MAXIMUM 2ND INLET |
| INLET PROJECTION LENGTH | 1.500 INCHES NOMINAL 1ST INLET |
| INLET PROJECTION LENGTH | 2.380 INCHES NOMINAL 2ND INLET |
| OUTLET CONNECTION TYPE | UNTHREADED 1ST OUTLET |
| OUTLET PROJECTION LENGTH | 3.310 INCHES NOMINAL |
| OUTLET PROJECTION LENGTH | 3.310 INCHES NOMINAL 1ST OUTLET |
| OUTLET INSIDE DIAMETER | 5.010 INCHES MINIMUM AND 5.030 INCHES MAXIMUM 1ST OUTLET |
| OUTLET LOCATION | 1.120 IN.,0.380 IN. OFF CENTER LINE,LOCATEDIN END SECTION OF BODY 1ST OUTLET |
| OUTLET OUTSIDE DIAMETER | 6.120 INCHES MINIMUM AND 6.130 INCHES MAXIMUM 1ST OUTLET |
| OVERALL HEIGHT | 8.250 INCHES NOMINAL |
| OVERALL LENGTH | 26.000 INCHES NOMINAL |
| OVERALL WIDTH | 11.500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721 MIL SPEC ALL MATERIAL RESPONSES OR QQ-S-766, CLASS 321, COND A FED SPEC 3RD MATERIAL RESPONSE |
| MATERIAL | |
| OPERATING POSITION | VERTICAL |
| DESIGN TYPE | DRY |
| COOLANT TYPE | AIR |
| BODY SHAPE | OVAL |