|
|
|
National Stock Number:
2990-00-112-0433
Federal Supply Class:
2990
National Item Identification Number:
001120433
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 5124615 | 24617 | GENERAL MOTORS CORP | | 5124615 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC |
|
Techincal Specification:
| BORE DIAMETER | 0.549 INCHES MINIMUM AND 0.564 INCHES MAXIMUM | | BORE LENGTH | 0.480 INCHES NOMINAL | | BORE TYPE | PLAIN STRAIGHT | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 2.260 INCHES NOMINAL | | FEATURES PROVIDED | KEYWAY AND SPLIT END SCREW CLAMPING FEATURE | | KEYWAY LENGTH | 0.480 INCHES NOMINAL | | KEYWAY WIDTH | 0.096 INCHES MINIMUM AND 0.105 INCHES MAXIMUM | | LINK END THICKNESS | 0.240 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.328 INCHES NOMINAL | | OVERALL WIDTH | 0.860 INCHES NOMINAL | | MATERIAL | IRON MALLEABLE | | SHAFT END THICKNESS | 0.480 INCHES NOMINAL | | SHAFT SECURING METHOD | KEYWAY | | SPECIAL FEATURES | SLOT CAST IN CENTER OF LEVER; OFFSET HEIGHT: 0.120 IN. NOMINAL | | STYLE DESIGNATOR | ONE HOLE FLAT LINK END, CLAMP TYPE SHAFT END |
|
|