|
|
|
National Stock Number:
3020-00-112-0062
Federal Supply Class:
3020
National Item Identification Number:
001120062
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 20182-6 | 14632 | DRS SIGNAL SOLUTIONS, INC. | | AB350-180-125 | 01351 | SOUTHERN GEAR & MACHINE INC |
|
Techincal Specification:
| ATTACHMENT METHOD | MOUNTING HOLE | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS | | FACE NOMINAL WIDTH | 0.125 INCHES | | HUB NOMINAL DIAMETER | 0.562 INCHES FIRST END | | HUB STYLE DESIGNATOR | PLAIN FIRST END | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE HUB | | MATERIAL | ALUMINUM ALLOY 2024 BODY | | MATERIAL | STEEL COMP 303 HUB | | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END | | MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END | | MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES TRANSVERSELY THROUGH HUB, FIRST END | | MOUNTING HOLE THREAD QUANTITY PER INCH | 40 TRANSVERSELY THROUGH HUB, FIRST END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 2.526 INCHES | | SPECIAL FEATURES | ATTACHING HOLES SPACED 90 DEG APART THRU HUB | | PITCH DIAMETER | 2.5000 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUB | | SURFACE TREATMENT | ANODIZE BODY | | SURFACE TREATMENT | PASSIVATE HUB | | TEETH QUANTITY | 180 | | TOOTH FORM | STANDARD |
|
|