| ATTACHMENT METHOD | MOUNTING HOLE |
| BACKLASH DESIGNATION | GRADE B |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.125 INCHES |
| HUB NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PINNED FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COMP 303S MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| PITCH DIAMETER | 0.5625 INCHES NOMINAL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE NOMINAL DIAMETER | 0.047 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN AND 1 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.125 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.603 INCHES |
| NOMINAL OVERALL LENGTH | 0.250 INCHES |
| PRECISION CLASSIFICATION | QUALITY NUMBER 8 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,E300 FINISH MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 27 |
| TOOTH FORM | STANDARD |