| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.094 INCHES |
| HUB NOMINAL DIAMETER | 0.310 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 416 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| PITCH DIAMETER | 0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| MATERIAL | STEEL COMP 416 OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 40 TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.177 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.394 INCHES |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 36 |
| TOOTH FORM | STANDARD |