| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | WEBBED, OFFSET, SOLID |
| BORE NOMINAL DIAMETER | 0.0912 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.120 INCHES |
| FIRST GROOVE NOMINAL DIAMETER | 0.1900 INCHES FIRST END |
| FIRST GROOVE NOMINAL WIDTH | 0.1300 INCHES FIRST END |
| HUB NOMINAL DIAMETER | 0.1600 INCHES SECOND END |
| HUB NOMINAL DIAMETER | 0.2500 INCHES FIRST END |
| HUB STYLE DESIGNATOR | 1 GROOVE FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 ALLOY 6061 T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY OVERALL |
| PITCH DIAMETER | 0.8432 INCHES NOMINAL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.060 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.0950 INCHES FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.0450 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.2250 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.8740 INCHES |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| SURFACE TREATMENT | ANODIZE OVERALL |
| TEETH QUANTITY | 54 |
| TOOTH FORM | STANDARD |