| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.472 INCHES SECOND END |
| BORE STYLE | INVOLUTE SPLINE SECOND END |
| BORE STYLE | PARTIAL COUNTERBORE FIRST END |
| COUNTERBORE NOMINAL DIAMETER | 0.576 INCHES COUNTERBORE FIRST END |
| COUNTERBORE NOMINAL DEPTH | 1.600 INCHES COUNTERBORE FIRST END |
| FACE NOMINAL WIDTH | 1.560 INCHES |
| HUB NOMINAL DIAMETER | 0.686 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6265 STEEL ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | GEAR-SPUR, DRIVE/GEAR, OIL PUMP-MAIN |
| PITCH DIAMETER | 1.6666 INCHES NOMINAL |
| MATERIAL | STEEL OVERALL |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.690 INCHES COUNTERBORE FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.175 INCHES SECOND END |
| NOMINAL OUTSIDE DIAMETER | 1.500 INCHES |
| PRESSURE ANGLE | 28.0000 DEGREES |
| SPLINE PITCH DIAMETER | 0.5000 INCHES NOMINAL SECOND END |
| SPLINE QUANTITY | 16 SECOND END |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| TEETH QUANTITY | 7 |