|
|
|
National Stock Number:
3040-00-034-4216
Federal Supply Class:
3040
National Item Identification Number:
000344216
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 019-00006-11 | 59556 | KOVATCH CORP. | | 1945472 | 077S2 | DELCO REMY AMERICA INC | | 1945472 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1948529 | 076M6 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 1948529 | 077S2 | DELCO REMY AMERICA INC | | 1948529 | 0FW39 | BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP | | 1948529 | 15434 | CUMMINS INC. | | 1948529 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 2132 1948529 | 89619 | MACK TRUCKS, INC. | | 2920000344216 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 2920000344216 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 4H1854 | 11083 | CATERPILLAR INC | | 72083 | 95097 | LITTLE GIANT CRANE AND SHOVEL INC | | A42199 | 10988 | CNH INDUSTRIAL AMERICA LLC | | K-500-CH-0589 | 59556 | KOVATCH CORP. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.290 INCHES NOMINAL | | FIRST END DIAMETER | 0.4980 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.3780 INCHES MINIMUM AND 0.3795 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.1000 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.498 INCHES MINIMUM AND 0.499 INCHES MAXIMUM | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.300 INCHES NOMINAL | | SECOND END DIAMETER | 0.3730 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM | | SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.210 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.099 INCHES MINIMUM AND 0.102 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0380 INCHES MINIMUM AND 0.0410 INCHES MAXIMUM | | SECOND END GROOVE DIAMETER | 0.3470 INCHES MINIMUM AND 0.3550 INCHES MAXIMUM | | SECOND END STYLE | TWO CIRCULAR GROOVES | | SPECIAL FEATURES | SECOND END,SECOND GROOVE MINIMUM DIAMETER 0.2530 INCHES,MAXIMUM DIAMETER 0.2545 INCHES | | STEP QUANTITY | 3 |
|
|