|
|
|
National Stock Number:
3040-00-040-1108
Federal Supply Class:
3040
National Item Identification Number:
000401108
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 1021026 | 22852 | SPALLA INC | | 1021026 | 22888 | FMC CORP | | 1021026 | 80212 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 8341026 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 6.375 INCHES NOMINAL | | FEATURES PROVIDED | KEYWAY | | KEYWAY LENGTH | 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM | | KEYWAY WIDTH | 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | LINK END HOLE DIAMETER | 0.312 INCHES MINIMUM AND 0.314 INCHES MAXIMUM | | LINK END THICKNESS | 0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM | | OVERALL WIDTH | 1.375 INCHES NOMINAL | | MATERIAL | ALUMINUM OR STEEL OR IRON | | SHAFT END THICKNESS | 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM | | SHAFT SECURING METHOD | KEYWAY | | SPECIAL FEATURES | OFFSET HEIGHT: 2.438 IN. NOMINAL | | SURFACE TREATMENT | ZINC |
|
|