|
|
|
National Stock Number:
3040-00-050-0218
Federal Supply Class:
3040
National Item Identification Number:
000500218
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 1501270 | 45402 | MEGGITT SAFETY SYSTEMS, INC. |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 | | BORE DIAMETER | 0.2410 INCHES MINIMUM AND 0.2430 INCHES MAXIMUM | | CHAMFER ANGLE IN DEG | 10.0 | | HOLE DIAMETER AND LOCATION | 0.0540 INCHES MINIMUM ALL HOLES AND 0.0580 INCHES MAXIMUM ALL HOLES | | LARGEST DIAMETER LENGTH | 0.070 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.365 INCHES MINIMUM AND 0.370 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 202 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 322 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 633 OR STEEL COMP 634 OR STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 430 OR STEEL COMP 430F OR STEEL COMP 430FSE OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 440F OR STEEL COMP 440FSE OR STEEL COMP 446 | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED ALL HOLES | | STYLE DESIGNATOR | ROUND W/DOUBLE CHAMFER | | SURFACE TREATMENT | PASSIVATE | | THICKNESS | 0.200 INCHES NOMINAL |
|
|