|
|
|
National Stock Number:
3040-00-053-4092
Federal Supply Class:
3040
National Item Identification Number:
000534092
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| HP943112-1 | 70236 | TACTAIR FLUID CONTROLS INC | | HP943112-1 | 84685 | TELEDYNE HYDRA-POWER DIV OF TELEDYNE INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 0.240 INCHES NOMINAL | | FIRST END EXTERNAL KEYWAY LENGTH | 0.219 INCHES NOMINAL | | FIRST END DIAMETER | 0.3900 INCHES NOMINAL | | FIRST END STYLE | INDENTED FLAT KEYWAY | | LARGEST STEP DIAMETER | 0.390 INCHES NOMINAL | | OVERALL LENGTH | 2.127 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 0.2530 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.285 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.1900 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0900 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.253 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0700 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.285 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.125 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED, CROSS DRILLED HOLE, AND EXTERNALLY THREADED | | SPECIAL FEATURES | INVOLUTE SPLINE FOLLOWS GROOVE ON 2ND END- 48/96 DIAMETRICAL PITCH,14 TEETH | | STEP QUANTITY | 8 |
|
|