|
|
|
National Stock Number:
3040-00-055-1062
Federal Supply Class:
3040
National Item Identification Number:
000551062
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1226188 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 1226188-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 59-875-1 | 56232 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5000 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.312 INCHES NOMINAL | | OVERALL LENGTH | 2.030 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.1871 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM | | SECOND END GROOVE DIAMETER | 0.1760 INCHES MINIMUM AND 0.1790 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0180 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM | | SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 1.824 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.042 INCHES NOMINAL | | SECOND END STYLE | TWO CIRCULAR GROOVES | | STEP QUANTITY | 3 |
|
|