|
|
|
National Stock Number:
3040-00-057-2932
Federal Supply Class:
3040
National Item Identification Number:
000572932
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| A407706-00 | 54418 | MILTOPE CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING | | SURFACE TREATMENT | PASSIVATE | | STYLE DESIGNATOR | ROUND STEPPED | | OUTSIDE DIAMETER | 0.625 INCHES NOMINAL | | THICKNESS | 0.591 INCHES MINIMUM AND | | 0.593 INCHES MAXIMUM | | SMALL END DIAMETER | 0.375 INCHES NOMINAL | | BORE DIAMETER | 0.2500 INCHES MINIMUM AND | | 0.2510 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.248 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | SECURING HOLE QUANTITY | 2 | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | SECURING HOLE TYPE AND LOCATION | THREADED ALL HOLES | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | ALL HOLES UNC | | NOMINAL THREAD SIZE AND LOCATION | 0.138 INCHES ALL HOLES | | SPECIAL FEATURES | GROOVED ONE END | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 54418 | | DESIGN CONTROL REFERENCE | A407706-00 |
|
|