|
|
|
National Stock Number:
3040-00-066-6882
Federal Supply Class:
3040
National Item Identification Number:
000666882
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| M663130151 | 16786 | F E L CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1875 INCHES MINIMUM AND 0.1878 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.2497 INCHES NOMINAL | | OVERALL LENGTH | 3.625 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.2497 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.2285 INCHES MINIMUM AND 0.2315 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0290 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.938 INCHES MINIMUM AND 0.941 INCHES MAXIMUM | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 2 |
|
|