|
|
|
National Stock Number:
3040-00-067-3569
Federal Supply Class:
3040
National Item Identification Number:
000673569
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 749847 | 80045 | L3HARRIS CINCINNATI ELECTRONICS CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 303 | | SURFACE TREATMENT | PASSIVATE | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | 2ND HOLE UNC | | BORE DIAMETER | 0.2550 INCHES NOMINAL | | STYLE DESIGNATOR | PLAIN ROUND | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764, TYPE 303, COND A-CANCELED FED SPEC SINGLE MATERIAL RESPONSE | | OUTSIDE DIAMETER | 0.438 INCHES NOMINAL | | THICKNESS | 0.156 INCHES NOMINAL | | NOMINAL THREAD SIZE AND LOCATION | 0.087 INCHES 2ND HOLE | | SECURING HOLE TYPE AND LOCATION | UNTHREADED 1ST HOLE | | SECURING HOLE TYPE AND LOCATION | THREADED 2ND HOLE | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | HOLE DIAMETER AND LOCATION | 0.0650 INCHES NOMINAL 1ST HOLE | | SECURING HOLE QUANTITY | 2 |
|
|