|
|
|
National Stock Number:
3040-00-074-4053
Federal Supply Class:
3040
National Item Identification Number:
000744053
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 320-124 | 0ZBJ4 | PHILIPS NORTH AMERICA LLC | | 320-124 | 52983 | HEWLETT-PACKARD CO WALTHAM DIV |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.041 INCHES NOMINAL | | FIRST END DIAMETER | 0.3121 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.2900 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0300 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 0.960 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | SECOND END DIAMETER | 0.1895 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.180 INCHES NOMINAL | | SECOND END STYLE | EXTERNAL THREADED | | STEP QUANTITY | 3 |
|
|