|
|
|
National Stock Number:
3040-00-083-1277
Federal Supply Class:
3040
National Item Identification Number:
000831277
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 51827 | 93835 | PARKER-HANNIFIN CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | FIRST END PITCH DIAMETER | 0.6875 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.7500 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.5975 INCHES MINIMUM AND 0.6085 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 11 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 0.863 INCHES MINIMUM AND 0.867 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.344 INCHES NOMINAL | | SECOND END DIAMETER | 0.8630 INCHES MINIMUM AND 0.8670 INCHES MAXIMUM | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.8000 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 1.2187 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.8630 INCHES MINIMUM AND 0.8670 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.7255 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 16 | | STEP QUANTITY | 2 |
|
|