|
|
|
National Stock Number:
3040-00-084-6041
Federal Supply Class:
3040
National Item Identification Number:
000846041
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 14-41694-1 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 14-41694-1 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 14-41694-1 | 79U29 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END EXTERNAL THREAD LENGTH | 0.460 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 0.625 INCHES NOMINAL | | OVERALL LENGTH | 3.533 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | STEP QUANTITY | 3 | | SPECIAL FEATURES | SHOT PEEN ALL SURFACES EXCEPT THREADS | | SURFACE FINISH | 16.0 MICROINCHES |
|
|