| MATERIAL | STEEL |
| WORM THREAD QUANTITY | 4 |
| WORM PRESSURE ANGLE IN DEG | 20.000 |
| WORM THREAD DIRECTION | RIGHT-HAND |
| WORM HELIX ANGLE | 14 DEG 56 MIN |
| WORM OUTSIDE DIAMETER | 0.707 INCHES NOMINAL |
| WORM PITCH DIAMETER | 0.625 INCHES NOMINAL |
| WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| SHAFT LOCATION | BOTH ENDS OF WORM |
| END SIMILARITY | NOT IDENTICAL |
| STRAIGHT UNTHREADED LENGTH | 0.248 INCHES NOMINAL FIRST END, FIRST PORTION |
| 0.335 INCHES NOMINAL FIRST END, SECOND PORTION |
| 0.342 INCHES NOMINAL FIRST END, THIRD PORTION |
| 0.469 INCHES NOMINAL SECOND END, FIRST PORTION |
| 0.094 INCHES NOMINAL SECOND END, SECOND PORTION |
| 0.339 INCHES NOMINAL SECOND END, THIRD PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.528 INCHES NOMINAL FIRST END, FIRST PORTION |
| 0.472 INCHES NOMINAL FIRST END, SECOND PORTION |
| 0.438 INCHES NOMINAL FIRST END, THIRD PORTION |
| 0.375 INCHES NOMINAL SECOND END, FIRST PORTION |
| 0.500 INCHES NOMINAL SECOND END, SECOND PORTION |
| 0.394 INCHES NOMINAL SECOND END, THIRD PORTION |
| INVOLUTE SPLINE QUANTITY | 11 FIRST END, FOURTH PORTION |
| INVOLUTE SPLINE PRESSURE ANGLE IN DEG | 30.0 FIRST END, FOURTH PORTION |
| INVOLUTE SPLINE PITCH DIAMETER | 0.3438 INCHES NOMINAL FIRST END, FOURTH PORTION |
| INVOLUTE SPLINE LENGTH | 0.356 INCHES NOMINAL FIRST END, FOURTH PORTION |
| SCREW THREAD SERIES DESIGNATOR | UNF BOTH ENDS |
| SHAFT THREAD DIRECTION | RIGHT-HAND SECOND END, FOURTH PORTION |
| THREAD LENGTH | 0.536 INCHES NOMINAL SECOND END, FOURTH PORTION |
| OVERALL LENGTH | 3.531 INCHES NOMINAL |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 88277 |
| DESIGN CONTROL REFERENCE | 2381350-503 |