|
|
|
National Stock Number:
3040-00-097-2583
Federal Supply Class:
3040
National Item Identification Number:
000972583
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 370131 | 66503 | WOODWARD, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.688 INCHES NOMINAL | | FIRST END DIAMETER | 0.3750 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 0.688 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.3750 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.3420 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.1250 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.3400 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 38 | | FIRST END STYLE | CIRCULAR GROOVED AND SPLINED (STRAIGHT) | | OVERALL LENGTH | 3.735 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DISTANCE FROM END TO GROOVE | 0.375 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL | | SECOND END DIAMETER | 0.3750 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 0.438 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.3750 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.3400 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 38 | | SECOND END STYLE | CIRCULAR GROOVED, CROSS DRILLED HOLE AND SPLINED (STRAIGHT) | | SECOND END GROOVE DIAMETER | 0.3420 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1250 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.378 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1280 INCHES NOMINAL |
|
|