|
|
|
National Stock Number:
3040-00-098-2716
Federal Supply Class:
3040
National Item Identification Number:
000982716
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 75673-1 | 70210 | HONEYWELL INTERNATIONAL INC. | | 75673-1 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO | | 75673-1 | 99193 | HONEYWELL INTERNATIONAL INC. | | TIP00976-13JAN71 | 97403 | CECOM LR CENTER |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.8600 INCHES MINIMUM AND 0.9000 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.8600 INCHES MINIMUM AND 0.9000 INCHES MAXIMUM | | OVERALL LENGTH | 2.1265 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM | | SECOND END SPLINE LENGTH | 0.3600 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM | | SECOND END SPLINE MAJOR DIAMETER | 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.3659 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 11 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.4345 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | STEP QUANTITY | 5 | | SURFACE FINISH | 8.0 MICROINCHES |
|
|