|
|
|
National Stock Number:
3040-00-101-7779
Federal Supply Class:
3040
National Item Identification Number:
001017779
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 66917 | 93835 | PARKER-HANNIFIN CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.090 INCHES NOMINAL | | FIRST END DIAMETER | 0.4689 INCHES MINIMUM AND 0.4692 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.4250 INCHES MINIMUM AND 0.4300 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.1250 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.210 INCHES NOMINAL | | SECOND END DIAMETER | 0.3408 INCHES MINIMUM AND 0.3438 INCHES MAXIMUM | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.3125 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.484 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.3408 INCHES MINIMUM AND 0.3438 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.2629 INCHES MINIMUM AND 0.2710 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 10 | | SPECIAL FEATURES | INTERNAL SPLINE FIRST END,0.578 IN. LG,12 TEETH,0.3438 IN. AND 0.3453 IN. MINOR DIA,0.4165 IN. AND 0.4246 IN. MAJOR DIA,PITCH DIAMETER 0.3750 IN.,PRESSURE ANGLE 30 DEG | | STEP QUANTITY | 5 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|