|
|
|
National Stock Number:
3040-00-102-4836
Federal Supply Class:
3040
National Item Identification Number:
001024836
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| BL-6703 | 08484 | BREEZE-EASTERN LLC | | BL6703 | 08484 | BREEZE-EASTERN LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.085 INCHES MINIMUM AND 0.700 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.1470 INCHES MINIMUM AND 0.1490 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0290 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.264 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | OVERALL LENGTH | 5.547 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.157 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SECOND END HOLE DIAMETER | 0.0620 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
|
|