|
|
|
National Stock Number:
3040-00-106-4547
Federal Supply Class:
3040
National Item Identification Number:
001064547
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 114P2041-2 | 77272 | THE BOEING COMPANY |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM | | LINK END THICKNESS | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | LINK END HOLE DIAMETER | 0.2486 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM | | MAJOR DIAMETER | 0.397 INCHES MINIMUM AND 0.403 INCHES MAXIMUM | | OVERALL WIDTH | 0.820 INCHES MINIMUM AND 0.860 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764, TYPE 303, COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | MINOR DIAMETER | 0.366 INCHES MINIMUM AND 0.368 INCHES MAXIMUM | | SHAFT END THICKNESS | 0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM | | SHAFT SECURING METHOD | SPLINE | | SPECIAL FEATURES | OFFSET HEIGHT: 0.260 IN. NOMINAL | | SPLINE QUANTITY | 24 |
|
|