|
|
|
National Stock Number:
3040-00-110-3833
Federal Supply Class:
3040
National Item Identification Number:
001103833
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| C-159 | 74410 | SAF-HOLLAND, INC. | | C159 | 80328 | DORSEY TRAILERS INC | | TM1C159P | 63479 | PROCESS SUPPLY INC DBA DEFENSE PRODUCTS INTERNATIONAL |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 1.250 INCHES NOMINAL | | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 4.375 INCHES NOMINAL | | FIRST END EXTERNAL KEYWAY LENGTH | 1.000 INCHES NOMINAL | | FIRST END DIAMETER | 0.9970 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM | | FIRST END HOLE DEPTH | 0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM | | FIRST END HOLE DIAMETER | 0.3750 INCHES NOMINAL | | FIRST END KEYWAY WIDTH | 0.2487 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM | | FIRST END STYLE | WOODRUFF KEYWAY AND CROSS DRILLED | | OVERALL LENGTH | 12.250 INCHES NOMINAL | | MATERIAL | STEEL COMP 1020 | | SECOND END DISTANCE BETWEEN HOLE CENTERS | 2.844 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 1.250 INCHES NOMINAL | | SECOND END ANGLE BETWEEN HOLES | 180.0 DEGREES NOMINAL | | SECOND END DIAMETER | 0.9970 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM | | SECOND END STYLE | TWO CROSS DRILLED HOLES | | SECOND END HOLE DEPTH | 0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM | | SECOND END HOLE DIAMETER | 0.3750 INCHES NOMINAL |
|
|