|
|
|
National Stock Number:
3040-00-118-5933
Federal Supply Class:
3040
National Item Identification Number:
001185933
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 101778 | 00198 | PRATT & WHITNEY CANADA CORP | | 101778 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.8600 INCHES MINIMUM AND 0.8900 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM | | OVERALL LENGTH | 2.243 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END EXTERNAL THREAD LENGTH | 0.3560 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.6500 INCHES MINIMUM AND 0.6600 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0840 INCHES MINIMUM AND 0.1040 INCHES MAXIMUM | | SECOND END HOLE DEPTH | 0.7500 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0940 INCHES NOMINAL | | SECOND END DIAMETER | 0.7500 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.3560 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.1100 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED, CROSS DRILLED HOLE, AND EXTERNALLY THREADED | | STEP QUANTITY | 8 |
|
|