| END SIMILARITY | NOT IDENTICAL |
| FSC APPLICATION DATA | MOUNT,TELESCOPE |
| OVERALL LENGTH | 6.375 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, CLASS 303, 303SE OR 304 CONDITION A FED SPEC ALL MATERIAL RESPONSES |
| MATERIAL | STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 |
| SCREW THREAD SERIES DESIGNATOR | UNF BOTH ENDS |
| SHAFT HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM |
| SHAFT LOCATION | BOTH ENDS OF WORM |
| SHAFT THREAD DIRECTION | RIGHT-HAND SECOND END, FIFTH PORTION |
| WORM BODY LENGTH | 3.173 INCHES NOMINAL |
| WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| WORM HELIX ANGLE | 5DEG44MIN |
| WORM OUTSIDE DIAMETER | 0.932 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
| WORM PITCH DIAMETER | 0.776 INCHES MINIMUM AND 0.778 INCHES MAXIMUM |
| WORM THREAD DIRECTION | LEFT-HAND |
| WORM PRESSURE ANGLE IN DEG | 14.500 |
| WORM THREAD LEAD | 0.245 INCHES NOMINAL |
| WORM THREAD QUANTITY | 1 |
| WORM THREAD SECTION LENGTH | 1.490 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| STRAIGHT UNTHREADED LENGTH | 0.047 INCHES MINIMUM FIRST END, SECOND PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.047 INCHES MINIMUM SECOND END, FOURTH PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.047 INCHES MINIMUM SECOND END, SECOND PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.047 INCHES MINIMUM SECOND END, SIXTH PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.062 INCHES MAXIMUM FIRST END, SECOND PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.062 INCHES MAXIMUM SECOND END, FOURTH PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.062 INCHES MAXIMUM SECOND END, SECOND PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.062 INCHES MAXIMUM SECOND END, SIXTH PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.263 INCHES NOMINAL FIRST END, FIRST PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.583 INCHES NOMINAL SECOND END, THIRD PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.910 INCHES MAXIMUM FIRST END, THIRD PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.900 INCHES MINIMUM FIRST END, THIRD PORTION |
| STRAIGHT UNTHREADED LENGTH | 1.198 INCHES NOMINAL SECOND END, SEVENTH PORTION |
| STRAIGHT UNTHREADED LENGTH | 1.410 INCHES NOMINAL SECOND END, FIRST PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.339 INCHES MINIMUM SECOND END, SIXTH PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.354 INCHES MAXIMUM SECOND END, SIXTH PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.357 INCHES MINIMUM SECOND END, FOURTH PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.374 INCHES NOMINAL SECOND END, SEVENTH PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.367 INCHES MAXIMUM SECOND END, FOURTH PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.401 INCHES MINIMUM FIRST END, SECOND PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.402 INCHES MINIMUM SECOND END, SECOND PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.436 INCHES MINIMUM FIRST END, THIRD PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.437 INCHES MAXIMUM FIRST END, THIRD PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.437 INCHES NOMINAL SECOND END, THIRD PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.416 INCHES MAXIMUM FIRST END, SECOND PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.417 INCHES MAXIMUM SECOND END, SECOND PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.450 INCHES MAXIMUM FIRST END, FIRST PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.440 INCHES MINIMUM FIRST END, FIRST PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.530 INCHES MINIMUM SECOND END, FIRST PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.540 INCHES MAXIMUM SECOND END, FIRST PORTION |
| SURFACE TREATMENT | PASSIVATE |
| TEETH HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM |
| THREAD LENGTH | 0.323 INCHES NOMINAL SECOND END, FIFTH PORTION |