|
|
|
National Stock Number:
3040-00-126-6460
Federal Supply Class:
3040
National Item Identification Number:
001266460
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 21-00263-00 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. | | 3273674 | 55380 | HATCH & KIRK, INC. | | G6BD1 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. | | K-3273674 | 18954 | KORODY-COLYER CORP A CR INDUSTRIES CO | | 3273674 | 72915 | GENERAL MOTORS CORP ELECTRO-MOTIVE DIV |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.7475 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM | | FIRST END SPLINE MAJOR DIAMETER | 0.7475 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.6190 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 6 | | FIRST END STYLE | SPLINED (STRAIGHT) | | FIRST END SPLINE LENGTH | 0.500 INCHES NOMINAL | | LARGEST STEP DIAMETER | 0.875 INCHES NOMINAL | | OVERALL LENGTH | 5.438 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | SECOND END SPLINE LENGTH | 1.000 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.5770 INCHES MINIMUM AND 0.5820 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 36 | | SECOND END STYLE | SPLINED (STRAIGHT) | | STEP QUANTITY | 5 |
|
|