|
|
|
National Stock Number:
3040-00-132-2168
Federal Supply Class:
3040
National Item Identification Number:
001322168
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 549-3437-002 | 13499 | ROCKWELL COLLINS, INC. | | 549-3437-002 | 95105 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | AAHG AND AAHH AND AMDL | | END SIMILARITY | IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.015 INCHES MINIMUM AND 0.025 INCHES MAXIMUM | | FIRST END DIAMETER | 0.1243 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.1155 INCHES MINIMUM AND 0.1185 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0120 INCHES MINIMUM AND 0.0140 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | OVERALL LENGTH | 2.131 INCHES MINIMUM AND 2.141 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | SPECIAL FEATURES | SURFACE PASSIVATED PER 580-0244-00;HEAT TREAT PER ROCKWELL C33-38 |
|
|