|
|
|
National Stock Number:
3040-00-133-9978
Federal Supply Class:
3040
National Item Identification Number:
001339978
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 313-1133-001 | 13829 | PARKER HANNIFIN CORPORATION | | 627653C1 | 0SAT8 | KOMATSU AMERICA CORP. | | 627653C1 | 29510 | KOMATSU AMERICAN INTL CO | | 627653C1 | 92679 | NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ | | L32324 | 10988 | CNH INDUSTRIAL AMERICA LLC | | YA1133 | 13829 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.9370 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 0.8750 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.880 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.8841 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.8210 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 21 | | FIRST END STYLE | SPLINED (INVOLUTE) | | MATERIAL | STEEL COMP 8620 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.075 INCHES NOMINAL | | SPECIAL FEATURES | BORE LG OF SHAFT,0.250 IN. DIA | | SURFACE FINISH | 100.0 MICROINCHES |
|
|