|
|
|
National Stock Number:
3040-00-134-1852
Federal Supply Class:
3040
National Item Identification Number:
001341852
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 727-029-001 | 26055 | PARKER-HANNIFIN CORPORATION | | 727-029-001 | 59211 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| SECOND END GROOVE WIDTH | 0.0900 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.0630 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | SPECIAL FEATURES | PASSIVATE PER MIL-S-5002 | | STEP QUANTITY | 5 | | END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.0350 INCHES NOMINAL | | FIRST END DIAMETER | 0.0620 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.0520 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0120 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.093 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.960 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.0600 INCHES NOMINAL | | SECOND END DIAMETER | 0.0775 INCHES NOMINAL |
|
|