3040-00-612-6302, LEVER,REMOTE CONTROL

National Stock Number:
3040-00-612-6302

Federal Supply Class:
3040

National Item Identification Number:
006126302

Description:
LEVER,REMOTE CONTROL

Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

Manufacturer Information:

352306

77445

RTX CORPORATION

Techincal Specification:

BORE TYPE	SPLINED
CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES	1.026 INCHES MINIMUM AND 1.036 INCHES MAXIMUM
DISTANCE BETWEEN FORK INSIDE SPREAD	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
LINK END HOLE DIAMETER	0.126 INCHES MINIMUM AND 0.128 INCHES MAXIMUM
LINK END THICKNESS	0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
MAJOR DIAMETER	0.391 INCHES MINIMUM AND 0.401 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL
MINOR DIAMETER	0.333 INCHES MINIMUM AND 0.336 INCHES MAXIMUM
SHAFT END THICKNESS	0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
SHAFT SECURING METHOD	SPLINE
SPECIAL FEATURES	ONE SPLINE OMITTED FOR LOCATING KEY; OFFSET HEIGHT: 0.060 IN. NOMINAL
SPLINE QUANTITY	17
STYLE DESIGNATOR	CLEVIS LINK END, SECURING HOLE(S) SHAFT END

Click here to Register for Free 30-day Trial