|
|
|
National Stock Number:
3110-00-052-9135
Federal Supply Class:
3110
National Item Identification Number:
000529135
Description:
BEARING,BALL,DUPLEX
Detail:
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.
|
Manufacturer Information:
| 205-040-106 | 97499 | BELL TEXTRON INC | | 205-040-106-1 | 97499 | BELL TEXTRON INC | | 3M9108WIMBRDUA1076 | 21335 | TIMKEN CO | | 7108KRDF | 38443 | SKF USA INC. |
|
Techincal Specification:
| BEARING PRELOAD RATING | 40.0 POUNDS NOMINAL | | BORE DIAMETER | 40.0 MILLIMETERS NOMINAL | | INTERNAL FIT-UP DESIGNATION | STANDARD | | LOAD DIRECTION | ANGULAR | | OVERALL OUTSIDE DIAMETER | 68.0 MILLIMETERS NOMINAL | | OVERALL WIDTH | 30.0 MILLIMETERS NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | 205-040-106,97499 MFR REF SINGLE MATERIAL RESPONSE RETAINER | | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE BALL | | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE INNER RING | | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE OUTER RING | | MATERIAL | COPPER ALLOY RETAINER | | MATERIAL | STEEL COMP E52100 BALL | | MATERIAL | STEEL COMP E52100 INNER RING | | MATERIAL | STEEL COMP E52100 OUTER RING | | RETAINER FABRICATION METHOD | MACHINED | | SPECIAL FEATURES | BEARINGS STABILIZED FOR OPERATIONFROM M 65 TO P 300 DEG F,INNER AND OUTER RACES FLUSH WITHIN 0.0005 IN. WHEN PRELOADED,BEARINGS MARKED W/SAME SERIAL NO. | | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 | | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING | | SURFACE FINISH | GROUND | | TEST DATA DOCUMENT | 38443-AQCP-2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 38443-AQCP-9A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 38443-AIS-84A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 21335-APS-33A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 21335-APS-36A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|