| BORE DIAMETER | 55.00 MILLIMETERS NOMINAL |
| BORE SHAPE | STRAIGHT |
| INNER RING WIDTH | 22.00 MILLIMETERS NOMINAL |
| INTERNAL CLEARANCE | 0.0090 INCHES MINIMUM AXIAL AND 0.0110 INCHES MAXIMUM AXIAL AND 0.0016 INCHES MINIMUM RADIAL AND 0.0035 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| OUTER RING WIDTH | 18.00 MILLIMETERS NOMINAL |
| OVERALL OUTSIDE DIAMETER | 90.00 MILLIMETERS NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | -3900,FSCM 91547 MFR REF SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | -4001,FSCM 91547 MFR REF SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | -4001,FSCM 91547 MFR REF SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | -4001,FSCM 91547 MFR REF SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | COPPER ALLOY RETAINER |
| MATERIAL | STEEL BALL |
| MATERIAL | STEEL INNER RING |
| MATERIAL | STEEL OUTER RING |
| RETAINER FABRICATION METHOD | MACHINED |
| SPECIAL FEATURES | MAX BALL DIA VARIATION IN ANY ONE BEARING 0.000020 IN.; STABILIZED FOR OPERATION AT 250 DEG F; MAX SURFACE FINISH,ID OF INNER RING AND OD OUTER RING 16 MICROINCHES AA BALL POCKET 30 MICROINCHES AA,RETAINER LAND RIDING SURFACE 50 MICROINCHES AA INNER AND OUTER RACEWAYS 13 MICROINCHES AA; PULLER GROOVE LOCATED ON INNER RING,0.070 IN. TO 0.090 IN. DEEP,0.070 IN. TO 0.090 IN. W,LOCATED 0.070 IN. TO 0.090 IN. FROM EXTENDED END |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| SURFACE FINISH | GROUND |
| TEST DATA DOCUMENT | +6903-91547 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |