|
|
|
National Stock Number:
3110-00-087-5701
Federal Supply Class:
3110
National Item Identification Number:
000875701
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 7224970P4 | 99971 | LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS | | 724970P4 | 99971 | LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS | | M81793-BI0KAA03CC71AS1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M81793-BIOKAA03CC71AS1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M81793/03-JE1C2N1H1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-B-81793 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SR45PPDK25-36 | 83086 | NEW HAMPSHIRE BALL BEARINGS INC | | SR45PPDK25-74 | 83086 | NEW HAMPSHIRE BALL BEARINGS INC | | SR45PPK25-74 | 83086 | NEW HAMPSHIRE BALL BEARINGS INC | | SS77R4XR5FD | 24617 | GENERAL MOTORS CORP | | SS77R4XR5FD | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV |
|
Techincal Specification:
| BORE DIAMETER | 0.2500 INCHES NOMINAL | | BORE SHAPE | STRAIGHT | | INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL | | LOAD DIRECTION | RADIAL | | LUBRICATION MATERIAL | GREASE | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | G300,FSCM 24446 MFR REF SINGLE MATERIAL RESPONSE | | OVERALL OUTSIDE DIAMETER | 0.6250 INCHES NOMINAL | | OVERALL WIDTH | 0.1960 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | RETAINER FABRICATION METHOD | PRESSED | | SHIELD QUANTITY | 2 | | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SURFACE FINISH | GROUND |
|
|