|
|
|
National Stock Number:
3110-00-088-3399
Federal Supply Class:
3110
National Item Identification Number:
000883399
Description:
BEARING,BALL,DUPLEX
Detail:
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.
|
Manufacturer Information:
| 204-040-424 | 97499 | BELL TEXTRON INC | | 204-040-424-001 | 97499 | BELL TEXTRON INC | | 204-040-424-1 | 97499 | BELL TEXTRON INC | | 456607 | 52676 | SKF USA INC. | | M9108WI3NGSRDUTA453S8 | 21335 | TIMKEN CO |
|
Techincal Specification:
| BORE DIAMETER | 1.5748 INCHES NOMINAL | | INTERNAL FIT-UP DESIGNATION | STANDARD | | LOAD DIRECTION | ANGULAR | | OVERALL OUTSIDE DIAMETER | 2.6774 INCHES NOMINAL | | OVERALL WIDTH | 0.9448 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | 204-040-424,97499 MFR REF SINGLE MATERIAL RESPONSE RETAINER | | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE BALL | | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE INNER RING | | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE OUTER RING | | MATERIAL | PLASTIC RETAINER | | MATERIAL | STEEL COMP E51100 BALL | | MATERIAL | STEEL COMP E52100 INNER RING | | MATERIAL | STEEL COMP E52100 OUTER RING | | RETAINER FABRICATION METHOD | MACHINED | | SPECIAL FEATURES | BEARINGS MARKED W/SAME SERIAL NO.,BEARINGS STABILIZED FOR OPERATION AT M 65 TO P 300 DEG F | | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 | | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING | | SURFACE FINISH | GROUND | | TEST DATA DOCUMENT | 21335-PS33 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 21335-P S36 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 38443-QCP-9 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 52676-470377 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|