|
|
|
National Stock Number:
3110-00-100-2360
Federal Supply Class:
3110
National Item Identification Number:
001002360
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 1000142 | 55207 | ARROW-MASTER, INCORPORATED | | 1000142 | 70143 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 12Z369-114 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 101KSZ | 38443 | SKF USA INC. | | 101KSZQ5A7 | 38443 | SKF USA INC. | | 304533 | 70143 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 9101NP | 21335 | TIMKEN CO | | 9101P | 21335 | TIMKEN CO | | 701185 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | 93L01 | 24617 | GENERAL MOTORS CORP | | 6001RSJ | 52676 | SKF USA INC. | | 37074-14 | 89446 | HILLER AIRCRAFT CORPORATION | | 3110001002360 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 3110001002360 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | S-16039-A | 15434 | CUMMINS INC. | | Z93L01XR1C | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | 93L01 | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | FF-B-171 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 12.00 MILLIMETERS NOMINAL | | BORE SHAPE | STRAIGHT | | INTERNAL FIT-UP DESIGNATION | STANDARD | | LOAD DIRECTION | RADIAL | | OVERALL OUTSIDE DIAMETER | 28.00 MILLIMETERS NOMINAL | | OVERALL WIDTH | 8.0 MILLIMETERS NOMINAL | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL BALL | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL RETAINER | | NONDEFINITIVE SPEC/STD DATA | IIICL7GR00 TYPE | | RETAINER FABRICATION METHOD | PRESSED | | SEAL QUANTITY | 1 | | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SURFACE FINISH | GROUND |
|
|